Skip to content
Troubleshooting

Why Does My Converted Image Look Blurry?

A picture that was sharp before conversion can look soft afterwards. Why does a converted image look blurry? There are only a few real causes, and each one has a setting that controls it. This page goes through them for the tools that make pictures: PDF to JPG, Compress Image, Resize Image and Merge JPG. One point first: Convertada's tools cannot add detail that is not in the picture. If the original is soft, the result will be soft too.

Find your cause quickly

| What you did | Most likely cause | What to change | | --- | --- | --- | | Converted a PDF page to JPG | Resolution too low | Choose High (300 dpi) | | Compressed an image | Quality too low | Raise the quality slider, or a larger target size | | Resized an image, then viewed it large | The picture is smaller than where it is shown | Resize to a larger width, from the original | | Merged JPG images | Match image sizes enlarged small pictures | Turn off Match image sizes | | Converted JPG to PNG or WebP | Detail was already lost in the JPG | Start from the original |

PDF to JPG: resolution and quality

PDF to JPG draws each page as a picture. Two settings decide how sharp it is:

  • Image resolution. Screen is 72 dpi, Standard is 150 dpi and High is 300 dpi. The tool starts at 150 dpi. Small text and fine lines need 300 dpi.
  • JPG quality. It starts at 90%. Lower values make smaller, softer files. The quality never goes below 30%.

If the pages look soft, convert again at High (300 dpi) and a higher JPG quality. Higher settings give larger files, so convert only the pages you need. If a very large page is scaled down to stay within 8,000 pixels on its longest side, the tool tells you, and that is a hard limit of the tool.

Compress Image: quality and target size

Compress Image deliberately trades detail for size. The slider goes from 10% to 100% and starts at 75%.

  • At low values, you see blocks and blurred edges, especially around text.
  • With a target size, the tool lowers quality, and with Allow resizing it may also shrink the dimensions. A smaller picture shown at the old size looks soft.

Raise the quality, choose a larger target, or turn resizing off. Compare against the original at the size where the picture will be used.

Resize Image: shrinking and enlarging

Resize Image only makes pictures smaller, never larger. A picture that you shrink to 400 px and then stretch to fill a 1,200 px space on a page will look blurry, because the page is enlarging it. Resize from the original to the width you really need. If you need several sizes, make each one from the original, not from a smaller copy.

Merge JPG: enlarging small pictures

Merge JPG has an option called Match image sizes. It scales the pictures to a common width, height or cell size, and smaller images may be enlarged. An enlarged picture looks softer. If a picture in the merged result looks soft, turn Match image sizes off, or use pictures that are of similar size. The quality setting for the merged JPG also matters: 92% is the default, and 100% is the maximum.

Four steps to fix a blurry result

  1. Find the tool you used in the table above and note its setting.
  2. Go back to the original file, not to the blurry copy.
  3. Run the tool again with a sharper setting: a higher resolution, a higher quality, a larger target, or Match image sizes turned off.
  4. Compare the new result with the original at the size where the picture will be used.

Things no tool can fix

  • The original is low resolution. Converting to PNG or another format does not add detail.
  • Repeated saving. Each time a JPG is saved again, a little quality is lost. Always start from the original.
  • A scanned page with a low scan setting. The scan is the limit.
  • Zooming into a small picture on screen. Any picture looks soft when you zoom in far enough.

Practical example

You convert a contract page to JPG at Screen (72 dpi), and the signature looks fuzzy. Convert that one page again at High (300 dpi) with a quality of 90% or more. The signature will be sharper, and the file larger.

Frequently asked questions

Can Convertada increase the resolution of an image?

No. The tools do not add detail. Resize Image only shrinks pictures.

Which resolution should I use for PDF to JPG?

Standard (150 dpi) suits most screens. Use High (300 dpi) for small text or print.

Why is my PNG not sharper than the JPG it came from?

PNG keeps the pixels it is given. It cannot recover detail that the JPG already lost.

Does converting to WebP make an image blurry?

WebP at normal quality looks similar to JPG. If it looks soft, use a higher quality or a larger target in Compress Image.

Are my pictures uploaded when I convert them?

No. The tools work in your browser.

Next steps

For the right settings from the start, read how to convert PDF to JPG online and how to compress images without losing quality. If you still see a problem, contact us through the contact page.

Was this article helpful?

Related tools